FREE SHIPPING on orders over $50
Solutions for Your Home and Family
Contact Us

Aluminum Large Umbrella Outdoor Dryer, 192 feet

Item#: 1710


Easy-to-handle outdoor umbrella dryer with all aluminum frame and pre-strung lines with 192 feet of clothesline.

Easy-to-handle outdoor umbrella dryer with all aluminum frame and pre-strung lines with 192 feet of clothesline.
HOUSEHOLD ESSENTIALS Large Umbrella Dryer with 192 feet of drying space lets you enjoy the freshness of wind and sun-dried laundry. This extra large is made entirely of aluminum.  It has more drying space, so you can hang more out at one time. It has dual-handle adjustment that allows you to open the umbrella clothesline to the height and tension you want. A notched center pole holds it perfectly in place when you have it ideally positioned. Its angled lines increase airflow, improving circulation throughout your hanging garments. Its 12 lines let you air multiple loads at once, giving all your clothes that sun-kissed scent. This dryer, with its lightweight aluminum frame and pole, rotates for easy access. With its fold down structure and ground sleeve, it is easily removed and stored during inclement weather, protecting your extra large umbrella dryer and keeping your lines clean.  This umbrella dryer is 72 inches high, 78 inches wide, and 80 inches deep.

Dryer includes ground sleeve for concrete installations.

  • Extra large umbrella clothesline outdoor dryer with 192 feet of drying space!
  • All aluminum frame and prestrung clothesline
  • Dual-handle adjustment for easy and precision
  • Folds down and removes from included ground peg for longer-lasting dryer
  • High impact plastic post cap and slide resists wear over lifetime
  • High impact plastic post cap and slide resists wear over lifetime
  • Folds down and removes from ground peg for storage
  • 72 inches high, 78 inches wide, and 80 inches deep; 1.5-inch diameter center post

Color: Silver

Dimensions:
72h x 78w x 80d inch
182.8 x 198.1 x 203.2 cm




Installation with Ground Sleeve:
(1) Dig a hold 8-12 inches in diameter and 20 inches deep that is wide at the bottom than at the top.
(2) Fill the hole with about 3 inches of small rocks, then pour about 6 inches of concrete into the hole (or until concrete comes to the bottom of the ground sleeve when held flush with the ground).
(3) Holding the sleeve in place, finish filling the hole with concrete (you may leave a small gap to fill in with dirt and grass if you wish).
(4) Immediately run a stick or tube through the sleeve and through the concrete to the rock base to allow water to drain.
(5) Insert the lower vertical pole of the dryer into the sleeve, then use a level to align the pole vertically.
(6) Remove pole and allow concrete to set fully, then install your dryer.

There are currently no Questions.

Ask A Question