Economy Push N' Loc Shower Caddy
- Push N' Loc shower caddy with chrome wire basket and plastic suction cup
- Patented one-step Push N' Loc suction system
- Holds up to 15 lbs
- Easy to remove, clean, and reapply on non-porous surfaces
- 3.54h x 9.65w x 5.91d inch
- Easy to Install with no drilling or tools required
Q: How does Everloc work?
A: The thermoplastic suction cups provide secure attachment by creating an airtight & waterproof seal. With no product assembly or mess, Everloc have also removed the hassle of drilling, tools and surface damage.
Q: How much weight can Everloc suction cups hold?
A: Everloc products with small suction cups can hold up to 8kgs*
Everloc products with large suction cups can hold up to 15kgs*
* The weight rating applies to suction cups installed under ideal conditions and should be used as a guide only. The maximum weight bearing ability of this product will vary from surface to surface.
Q: What surfaces can I install Everloc suction cups on?
A: For best results, Everloc should be installed on clean and smooth non-porous surfaces such as Tiles, Glass or mirrors.
For installation on non-porous surfaces (such as wood, gyproc/plasterboard etc), you may need to use Everloc Adhesive Disks. These adhesive plastic disks can be applied to any surface, providing a stable platform for you to install your Everloc suction cups.
Note: As Everloc Adhesive Disks use strong adhesive to support the weight of your product, some damage to your installation surface may occur if not removed carefully.
Q: How do I remove my Everloc product?
A: To remove your suction cup/s, use the removal tool provided to carefully slide underneath the suction cup to break the seal. If you lose or misplace your removal tool, you can simply use a flat object like a business card or piece of cardboard so simply slide underneath the suction cup.
Please avoid the use of sharp objects that may cause damage to the surface or product eg: knives, pens, pencils.
It is recommended that you soak the suction cups in hot water for 15 minutes to allow the suction cups to reset prior to re-installation.
Q: Is Everloc reusable?
A: All Everloc products can be re-installed time and time again and are just as easy to remove as they are to install. Another benefit of using Everloc is its portability, so when it comes to moving home or changing the location you can remove and re-install your product with ease.
Q: Why aren't my suction cups sticking to the wall?
A: Your suction cups may not be sticking to the wall if you are trying to attach the product to a porous surface such as a painted plaster wall, gyprock or wallpaper. Everloc products are recommended for use only on non-porous surfaces such as glass, tiling, and mirrors.
You may have trouble getting the suction cups to stay put if you have installed the product incorrectly. Some common user errors include forgetting to remove to protective cover from the bottom of the suction cup, placing the suction cups over joints or grout lines and not applying enough pressure on the suction cup during installation.
Everloc leads in suction based bathroom and kitchen accessories, and now ranges in over 70 countries. Constantly evolving Everloc has recently introduced the new patented Dual Action System suction, which has an internal silicon ring that acts as a secondary seal & fills out any small imperfections in the mounting surface.; All Everloc products require NO tools, NO drilling, and NO screw driving and will leave NO surface damage.; Everloc boasts a variety of products across 3 different ranges: The Premium Endure range made from rust resistant stainless steel, the Solutions range which offers a fresh contemporary design and the Push N' Loc range for all your bathroom necessities.
The Economy Push N' Loc system has patented suction technology to create superior holding power with a single step! It has the holding power you want at a value you can't turn down.
Ask A Question